Catalogue

Description

  • Hard mar-resistant finish
  • Stands up to periodic maintenance scrubbing
  • Ablative resin chemistry to wear away over time preventing paint build up
  • Compatible with most epoxy primers, but not compatible over most traditional antifouling paints
  • Routine maintenance scrubbing or boat motion will likely be needed to keep the hull clean
  • Growth should wipe away without paint loss

ePaint Sunwave® coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint Sunwave® or other ePaint products.

 

  • Economically priced
  • Self-priming on aluminum surfaces
  • Hard, photo-ablative surface
  • No coat-to-launch time
  • Safe to haul in and out of the water
  • Uses:
    • Pontoon boats
    • Dry-stacked boats
    • Dry-sailed boats
    • Trailered boats
  • Coverage: 210 ft2/gal
  • Available colors: White and Gray
  • Packaging: two component system, available in gallons only
  • Mixing ratio: 4.3 Part A to 1.0 Part B
  • Thinner: mineral-free bottled water, generally not required, 10% max by volume
  • Clean up: water
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP)
  • Finish: hard eggshell-like
  • Recommended Number of Coats: 2 full coats with additional coat(s) around waterline and high wash areas for longest service life
  • Safe for: fiberglass, aluminum, steel (primed), wood (primed), epoxy-type primers, and many existing hard-type bottom paints

For application procedures and requirements see the Tech Data Sheet tab.