Catalogue

3
Yes
None
1
1000000
Search...
/wordpress1/catalogue/
Thumbnail
Sort By:

Categories:

Sub-Categories:

Tags:

Ecominder Antifouling Paint
$200.00
Ecominder Antifouling Paint Image

Description

  • Copper free
  • Use in both fresh water and low fouling salt waters
  • Formulated with bio-polymers derived from renewable resources
  • Recyclable container
  • Designed to control slime, algae, and bacteria
  • Features Zinc Omadine and ePaint’s patented photoactive technology to control settling and attachment of hard shell organisms
  • Use on fiberglass, aluminum, steel and wood hulls
  • Great for cruising sailboats, powerboats, pontoon boats, and trailered boats
  • Safe for use on engine brackets and running gear

ePaint Ecominder coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint Ecominder or other ePaint products.

 

Features

  • Safe and Easy to Apply
    • Compatible over most popular antifouling paints
    • No VOC’s or harsh solvent smell
    • Apply multiple coats per day at warm temperatures
    • Clean up with soap and water
  • Unlimited dry to launch time; paint in the fall, launch in the spring
  • Advanced ePaint Antifouling Technology
    • Innovative formula replaces harsh solvents with water
    • Features Zinc Omadine® for the most advanced slime control and ePaint’s patented photoactive technology
    • Hybrid self-polishing finish provides the benefits of both hard and soft type antifouling paints
  • Controlled wear so no old paint build up
  • Scrub with minimal loss of paint

 

Overview

  • Coverage rate: 350-400 ft2 /gal; 88-100 ft2 qt
  • Available colors: White, Gray, Black, Green, Blue, Dark blue, Red, Signal Yellow and Safety Orange
  • Packaging: Quart, Gallon, Five Gallon
  • Thinner: Bottled water
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP)
  • Finish: Low Gloss
  • Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.
  • Safe for all hull types
  • Not recommended for high fouling bodies of water

For complete application procedures and requirements see the Tech Data Sheet tab.

EP-10 Thinner
$72.00
EP-10 Thinner Image

Description

Use to ease application when applying paints at cool and hot temperatures

  • For smoother finish when rolling
  • For spray application

ePaint EP-10 coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint EP-10 or other ePaint products.

Features/Overview

Safe and easy to use

  • Packaging: Gallon, Five Gallon
  • Not for sale, use or distribution in California

For complete application procedures and requirements see the Tech Data Sheet tab.

EP-13 Thinner
$60.00
EP-13 Thinner Image

Description

Use to ease application when applying paints at cool and hot temperatures

  •  For smoother finish when rolling
  • For spray application

ePaint EP-13 coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint EP-10 or other ePaint products.

Features/Overview

Safe and easy to use

  • Packaging: Quart, Gallon
  • Not for sale, use or distribution in California

For complete application procedures and requirements see the Tech Data Sheet tab.

EP-2000 Antifouling Paint
$290.00
EP-2000 Antifouling Paint Image

Description

  • EP-2000 is a copper-free, water based antifouling paint.
  • Paint cures to a hard mar-resistant surface which can be wet sanded to a mirror like finish if desired.
  • EP-2000 provides the fastest, cleanest, and whitest bottom you’ll find anywhere.
  • Practical Sailor magazine has consistently given EP-2000 an Excellent rating in Florida waters, claiming that EP-2000 is the only copper-free paint to ever last 24 months in Florida waters.
  • While EP-2000 is not compatible over existing antifouling coatings, it can be re-applied over EP-2000 once the change is made.

ePaint EP-2000 coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint EP-2000 or other ePaint products.

Features

  • Excellent antifouling performance
  • Well-suited for all boat types in salt or fresh water
  • Hard finish making it perfect for racers or trailering
  • Copper and organotin free
  • Hauling and re-launching does not adversely impact performance
  • Long lasting protection
  • Easy clean up with soap and water
  • VOC compliant in all states

 

 

Coverage rate 210 ft2 /gal

Available in White, Gray, Black, Green, Blue, Dark Blue, Red, Signal Yellow and Safety Orange

Packaging: Quart, Gallon, Five Gallon

Thinner: Bottled water

Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP)

Finish: Low Gloss

Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.

Safe for all hull types

For complete application procedures and requirements see the Tech Data Sheet tab.

EP-2000 For Pontoons
$290.00
EP-2000 For Pontoons Image

Description

  • EP-2000 is a copper-free, water based antifouling paint.
  • Self-priming over new/clean aluminum
  • Paint cures to a hard mar-resistant surface which can be wet sanded to a mirror like finish if desired.
  • EP-2000 provides the fastest, cleanest, and whitest bottom you’ll find anywhere.
  • Practical Sailor magazine has consistently given EP-2000 an Excellent rating in Florida waters, claiming that EP-2000 is the only copper-free paint to ever last 24 months in Florida waters.
  • While EP-2000 is not compatible over existing antifouling coatings, it can be re-applied over EP-2000 once the change is made.

ePaint EP-2000 coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint EP-2000 or other ePaint products.

 

Features

 

  • Excellent antifouling performance
  • Well-suited for all boat types in salt or fresh water
  • Hard finish making it perfect for trailering
  • Copper and organotin free
  • Hauling and re-launching does not adversely impact performance
  • Long lasting protection
  • Easy clean up with soap and water
  • VOC compliant in all states

 

  • Coverage rate 210 ft/gal
  • Available in White, Gray, Black, Green, Blue, Dark Blue, Red, Signal Yellow and Safety Orange
  • Packaging: Quart, Gallon, Five Gallon
  • Thinner: Bottled water
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP) ? Finish: Low Gloss
  • Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.
  • Safe for all hull types

For complete application procedures and requirements see the Tech Data Sheet tab.

EP-21 Aerosol Release Coating
$30.00
EP-21 Aerosol Release Coating Image
  • Available in Yamaha® like silver blue and Honda® like metallic gray
  • Biocide free, photo-active release coating
  • Releases biofouling by slowly eroding like a bar of soap
  • Single season protection on boats that move; multi-season protection is possible if boat is seldom used
  • Applies just like traditional paints
  • Multiple coats may be applied in the same day
  • Is not considered an antifouling coating; some maintenance scrubbing may be required to keep bottom free of growth

ePaint EP-21 Aerosol coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint EP-21 Aerosol or other ePaint products.

 

  • Practical Sailor magazine rates “Excellent” after 6 months; “Good” after 12 months in Florida waters
  • Soft ablative formula wears over time releasing bio-fouling and preventing paint build up
  • For use on fiberglass, aluminum, wood, outboards, outdrives, and trim tabs
  • Fast drying formula, multiple coats per day possible
  • No maximum dry-to-launch times
  • Safe to haul in and out of the water
  • Compatible with most epoxy-type primers and popular traditional antifouling paints

 

  • Coverage rate: 15 ft/can
  • Available colors: White, Gray, Black, Metallic Silver, Metallic Blue Silver
  • Packaging: 12 oz. spray can
  • Thinner: ePaint EP-13 thinner, clean up
  • Application: Spray
  • Finish: Eggshell-like finish
  • Recommended number of coats: 2 or 3 full coats
  • Compatibility: Fiberglass, aluminum, wood, outboards, outdrives, trim tabs, epoxy type primers, and most popular traditional bottom paints. Safe for aluminum and metal; prime bare metal first with ePaint EP-Prime 1000

For complete application procedures and requirements see the Tech Data Sheet tab.

Considerations:

  • Do not apply EP-21 on unpainted metal surfaces; for bare metal, first coat with EP-Prime 1000 corrosion inhibiting primer.
  • Due to the soft ablativeness of EP-21, applying the recommended number of coats is strongly recommended for maximum service life
  • For easier application at cool or warm temperatures, or for spray application, reduce with E-Paint EP-13 thinner
  • EP-21 does not contain a pesticide and it is not considered an antifouling coating; typically boat movement provides enough force to knock growth away from hull. Depending on boat usage and environment, maintenance scrubbing may be required to keep hull clean but growth is readily removed as long as paint is on the hull
  • Take care when cleaning EP-21 surface via power washing at end of season; too forceful spray technique will remove good paint
  • EP-21 is a very soft ablative and should be removed before re-coating with a different paint system; EP-21 is readily removed by power washing or sanding
EP-21 Release Coating
$168.00
EP-21 Release Coating Image

Description

  • Biocide free, photo-active release coating
  • Releases biofouling by slowly eroding like a bar of soap
  • Single season protection on boats that move; multi-season protection is possible if boat is seldom used
  • Applies just like traditional paints
  • Multiple coats may be applied in the same day
  • Is not considered an antifouling coating; some maintenance scrubbing may be required to keep bottom free of growth

ePaint EP-21 coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint EP-21 or other ePaint products.

Description

  • Practical Sailor magazine rates “Excellent” after 6 months; “Good” after 12 months in Florida waters
  • Soft ablative formula wears over time releasing bio-fouling and preventing paint build up
  • For use on fiberglass, aluminum, wood, outboards, outdrives, and trim tabs
  • Fast drying formula, multiple coats per day possible
  • No maximum dry-to-launch times
  • Safe to haul in and out of the water
  • Compatible with most epoxy-type primers and popular traditional antifouling paints

 

  • Coverage rate: 310 ft/gal; 78-80 ft2 /qt
  • Available colors: White, Gray
  • Packaging: Quart, Gallon, and Five Gallon
  • Thinner: ePaint EP-13 thinner
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP) ? Finish: Eggshell-like finish
  • Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.
  • Compatibility: Fiberglass, aluminum, wood, outboards, outdrives, trim tabs, epoxy type primers, and most popular traditional bottom paints.
  • Safe for aluminum and metal; prime bare metal first with ePaint EP-Prime 1000

For complete application procedures and requirements see the Tech Data Sheet tab.

Considerations:

  • Do not apply EP-21 on unpainted metal surfaces; for bare metal, first coat with EP-Prime 1000 corrosion inhibiting primer.
  • Due to the soft ablativeness of EP-21, applying the recommended number of coats is strongly recommended for maximum service life
  • For easier application at cool or warm temperatures, or for spray application, reduce with E-Paint EP-13 thinner
  • EP-21 does not contain a pesticide and it is not considered an antifouling coating; typically boat movement provides enough force to knock growth away from hull. Depending on boat usage and environment, maintenance scrubbing may be required to keep hull clean but growth is readily removed as long as paint is on the hull
  • Take care when cleaning EP-21 surface via power washing at end of season; too forceful spray technique will remove good paint
  • EP-21 is a very soft ablative and should be removed before re-coating with a different paint system; EP-21 is readily removed by power washing or sanding
EP-Prime 1000 Epoxy Primer
$147.00
EP-Prime 1000 Epoxy Primer Image

Description

  • Two part epoxy primer
  • Robust and easy to use
  • Corrosion protection for metal surfaces
  • Improves adhesion of any ePaint bottom paint to all hull types
  • Minimizes water absorption; is excellent choice for osmotic blister prevention on fiberglass hulls

ePaint EP-Prime 1000 coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint EP-Prime 1000 or other ePaint products.

 

  • Lowers the cost of metal surface preparation; self-priming on metal, no other chemical treatments required
  • High build epoxy and low VOC
  • Easy to apply by roll or spray
  • Surface tolerant
  • Cures at low temperatures
  • Coverage rate:
    • Tie coat – 310 ft/gal at 3.5 mils dry per coat
    • Metal and barrier protection – 240 ft2 /gal ? Available colors: White, Haze Gray and Oxide Red
  • Packaging: Two component gallon kits
  • Thinner: EP-10
  • Application: Traditional methods – roll (1/4” to ½”nap or foam), brush, or airless spray
  • Finish: Semi-gloss
  • Recommended number of coats:
    • Tie coat – one coat
    • Metal – two coats
    • Barrier protection – three coats
  • Safe for aluminum, fiberglass, hull types
  • Not recommended for application over existing antifouling or foul-release coatings, remove first

For complete application procedures and requirements see the Tech Data Sheet tab.

SN-1 Antifouling Paint
$273.00
SN-1 Antifouling Paint Image

Description

  • Copper and tributyltin-free alternative antifouling paint for heavy duty applications
  • Formerly only available for U.S. Government agencies, SN-1 now approved for use on commercial vessels and commercial application
  • Use in both fresh and salt water
  • Features ePaint’s patented photo-active technology and Sea Nine 211N™ active
  • Compatible over most popular antifouling paints and easy for commercial applicators to apply
  • Will not promote galvanic corrosion on aluminum, steel or metal hulls and parts
  • Uses:
    • Crew boats
    • Patrol boats
    • Utility boats
    • Emergency response, police, and fire boats
    • Transport vessels
    • Fishing boats
    • Military assault craft

Considerations:

Due to the photoactive nature of ePaint SN-1, additional coats around the waterline are strongly recommended to extend service life.

SN-1 is thermo-plastic by nature and hot temperatures above 90oF can soften SN-1 slightly, particularly on aluminum boats in full sun, which can cause paint to dig into pads and straps. If SN-1 is to be launched in hot climates, consider launching boat in the morning before full sun and temperatures climb. Place plastic sheeting between pads and straps before lifting. The thermo-plastic nature of SN-1 has no effect on antifouling performance and paint will immediately harden when placed into service of cooler waters.

Other:

ePaint SN-1 coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint SN-1 or other ePaint products.

Features

 

  • Self-polishing finish controls release of active materials and prevents old paint build up
  • Unlimited coat to launch time, paint in the fall before winter storage
  • Safe to haul boats in and out of the water
  • Perfect for any boat, outdrives and running gear

Overview

 

  • Coverage rate: 270 ft2/gal; 68 ft2/qt
  • Available colors: White, Gray, Black, Green, Blue, Dark Blue and Red
  • Packaging: Single component; Gallon
  • Thinner: ePaint EP-13 thinner
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP
  •  Finish: Eggshell-like
  •  Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges
  •  Average Service Life: Affected by number of coats, color choice, boating usage, available sunlight and water temperatures; average service life for boats in temperate waters is 18-22 months, boats in tropical waters is 12-18 months with three full coats and additional coats around waterline, leading edges, and high wash areas
  •  Compatibility: Fiberglass, aluminum, steel, outboards, outdrives, trim tabs, epoxy type primers, and most popular traditional bottom paints.
  •  Not recommended for:
    • Trailered boats in hot climates
    • Over very soft ablative paints
    • Bare metal (prime first)
    • Application by non-commercial painters
  • ePaint SN-1 must be applied by a commercial facility or government entity Proper personal protective equipment must be worn when applying ePaint SN-1 (e.g. goggles, gloves, respirator with organic vapor cartridge, Tyvek suit, etc.)

For complete application procedures and requirements see the Tech Data Sheet tab.

Want to buy now? Authorized vendors linked below. Click the logo to visit the product page directly.

 

 

logo

James Town Distributors

 

 

 

 

FisheriesLogo

 

head01

 

SN-1 HP Antifouling Paint
$318.00
SN-1 HP Antifouling Paint Image

Description

  • Copper and tributyltin-free alternative antifouling paint for high performance applications
  • Formerly only available for U.S. Government agencies, SN1 HP now approved for use on commercial vessels and commercial application
  • Offers drag reduction and fuel savings
  • Use in both fresh and salt water
  • Features ePaint’s patented photo-active technology and Sea Nine 211N™ active
  • Compatible over most popular antifouling paints and easy for commercial applicators to apply
  • Will not promote galvanic corrosion on aluminum, steel or metal hulls and parts
  • Used for boats with average operating speeds of greater than 30 knots:
    • Crew boats
    • Patrol boats
    • Utility boats
    • Emergency response, police, and fire boats
    • Transport vessels
    • Fishing boats
    • Military assault craft

Considerations:

  • Due to the photoactive nature of ePaint SN-1 HP, additional coats around the waterline are strongly recommended to extend service life.
  • SN-1 HP is thermo-plastic by nature and hot temperatures above 90 deg. F can soften SN-1 HP slightly, particularly on aluminum boats in full sun, which can cause paint to dig into pads and straps.
  • If SN-1 is to be launched in hot climates, consider launching boat in the morning before full sun and temperatures climb. Place plastic sheeting between pads and straps before lifting. The thermo-plastic nature of SN-1 HP has no effect on antifouling performance and paint will immediately harden when placed into service of cooler waters.

Other:

ePaint SN1 HP coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint SN1 HPor other ePaint products.

Features

  • Self-polishing finish controls release of active materials and prevents old paint build up
  • Unlimited coat to launch time, paint in the fall before winter storage
  • Safe to haul boats in and out of the water
  • Perfect for any boat, outdrives and running gear

 

Overview

  • Coverage rate: 270 ft2/gal; 68 ft2/qt
  • Available colors: White, Gray, Black and Safety Orange
  • Packaging: Single component; Gallon
  • Thinner: ePaint EP-13 thinner
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP) ? Finish: Eggshell-like
  • Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.
  • Average Service Life: Affected by number of coats, color choice, boating usage, available sunlight and water temperatures; average service life for boats in temperate waters is 18-22 months, boats in tropical waters is 12-18 months with three full coats and additional coats around waterline, leading edges, and high wash areas
  • Compatibility: Fiberglass, aluminum, steel, outboards, outdrives, trim tabs, epoxy type primers, and most popular traditional bottom paints.
  • Not recommended for:
    • Trailered boats in hot climates
    • Over very soft ablative paints
    • Bare metal (prime first)
    • Application by non-commercial painters
  • ePaint SN-1 HP must be applied by a commercial facility or government entity
  • Proper personal protective equipment must be worn when applying ePaint SN-1 (e.g. goggles, gloves, respirator with organic vapor cartridge, Tyvek suit, etc.)

For complete application procedures and requirements see the Tech Data Sheet tab.

Sunwave Photo Active Coating
$168.00
Sunwave Photo Active Coating Image

Description

  • Hard mar-resistant finish
  • Stands up to periodic maintenance scrubbing
  • Ablative resin chemistry to wear away over time preventing paint build up
  • Compatible with most epoxy primers, but not compatible over most traditional antifouling paints
  • Routine maintenance scrubbing or boat motion will likely be needed to keep the hull clean
  • Growth should wipe away without paint loss

ePaint Sunwave® coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint Sunwave® or other ePaint products.

 

  • Economically priced
  • Self-priming on aluminum surfaces
  • Hard, photo-ablative surface
  • No coat-to-launch time
  • Safe to haul in and out of the water
  • Uses:
    • Pontoon boats
    • Dry-stacked boats
    • Dry-sailed boats
    • Trailered boats
  • Coverage: 210 ft2/gal
  • Available colors: White and Gray
  • Packaging: two component system, available in gallons only
  • Mixing ratio: 4.3 Part A to 1.0 Part B
  • Thinner: mineral-free bottled water, generally not required, 10% max by volume
  • Clean up: water
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP)
  • Finish: hard eggshell-like
  • Recommended Number of Coats: 2 full coats with additional coat(s) around waterline and high wash areas for longest service life
  • Safe for: fiberglass, aluminum, steel (primed), wood (primed), epoxy-type primers, and many existing hard-type bottom paints

For application procedures and requirements see the Tech Data Sheet tab.

ZO Antifouling Paint
$285.00
ZO Antifouling Paint Image

Description

  • Excellent general purpose antifouling paint
  • Features Zinc Omadine® and ePaint’s patented photoactive technology to prevent settling and attachment of hard shell-type organisms
  • Extremely effective antifouling protection
  • Recommended for all recreational and commercial vessels; work boats, crew boats, fishing boats, police and fire boats
  • Suitable for fresh and salt water
  • Prevents grass, slime, algae and bacteria
  • Safe for aluminum boats, motor brackets, trim tabs and running gear

ePaint ZO coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint ZO or other ePaint products.

 

Features

  • Available in bright colors and & true white – does not discolor like competitors’ white paints
  • Hybrid finish incorporates benefits of both hard and ablative type paints – no old paint build up
  • Unlimited coat to launch time, paint in the fall before winter storage
  • Okay to haul boats in and out

Overview

  • Coverage rate: 310 ft2/gal; 78-80 ft2/qt
  • Available colors: White, Gray, Black, Green, Blue, Dark Blue, Red, Signal Yellow and Safety Orange
  • Packaging: Quart, Gallon, Five Gallon
  • Thinner: ePaint EP-13 thinner
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP)
  • Finish: Eggshell-like finish
  • Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.
  • Safe for all hull types
  • Dark colors are not recommended for high fouling environments. Chose white or gray for these conditions.

For complete application procedures and requirements see the Tech Data Sheet tab.

ZO HP Antifouling Paint
$325.00
ZO HP Antifouling Paint Image

Description

  • High performance antifouling paint recommended for fresh and salt water
  • Features Zinc Omadine® and ePaint’s patented photoactive technology to prevent settling and attachment of hard shell-type organisms
  • Formulated with fluoro-polymers to provide the lowest friction surface when wet
  • Great choice for the serious sailor
  • Extremely effective antifouling protection
  • Prevents grass, slime, algae and bacteria
  • Offers drag reduction and fuel savings
  • Good for boats that are frequently hauled and launched by trailer

Considerations:

  • Due to the photo-active nature of ZO-HP, additional coats around the waterline strongly recommended to extend service life.
  • ZO-HP is viscous, for easier application at cool or warm temperatures or for spray application, reduce only with ePaint EP-13 thinner
  • For a smooth racing bottom finish, spray application is the recommended method. Alternately, ZO-HP may be rolled and once hard it can be wet sanded and polished to a mirror like finish. Note: it will take several days at warm temperatures due to fluoropolymer technology for paint to harden to a point where it will readily sand and not gum up paper, especially if applied at cool temperatures.

Other:

ePaint ZO-HP coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint ZO-HP or other ePaint products.

 

Features

  • Hybrid finish incorporates benefits of both hard and ablative type paints – no old paint build up
  • Maximum dry to launch time of 60 days
  • Okay to haul boats in and out
  • Compatible over many hard antifoulants and epoxy barrier coats
  • Paint may be maintenance scrubbed in-water without taking paint off

Overview

  • Coverage rate: 275 ft2 /gal; 70 ft2 /qt
  • Available colors: White, Gray, and Safety Orange
  • Packaging: Single component available in Quart, Gallon, and Five Gallon containers
  • Thinner: ePaint EP-13 thinner
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP). For a racing finish, spray application is preferred method or alternatively roll and wet sand smooth when finish is hard
  • Finish: Eggshell-like finish
  • Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.
  •  Safe for all hull types

For complete application procedures and requirements see the Tech Data Sheet tab.

Paint
SN-1 Antifouling Paint
$273.00
SN-1 Antifouling Paint Image

Description

  • Copper and tributyltin-free alternative antifouling paint for heavy duty applications
  • Formerly only available for U.S. Government agencies, SN-1 now approved for use on commercial vessels and commercial application
  • Use in both fresh and salt water
  • Features ePaint’s patented photo-active technology and Sea Nine 211N™ active
  • Compatible over most popular antifouling paints and easy for commercial applicators to apply
  • Will not promote galvanic corrosion on aluminum, steel or metal hulls and parts
  • Uses:
    • Crew boats
    • Patrol boats
    • Utility boats
    • Emergency response, police, and fire boats
    • Transport vessels
    • Fishing boats
    • Military assault craft

Considerations:

Due to the photoactive nature of ePaint SN-1, additional coats around the waterline are strongly recommended to extend service life.

SN-1 is thermo-plastic by nature and hot temperatures above 90oF can soften SN-1 slightly, particularly on aluminum boats in full sun, which can cause paint to dig into pads and straps. If SN-1 is to be launched in hot climates, consider launching boat in the morning before full sun and temperatures climb. Place plastic sheeting between pads and straps before lifting. The thermo-plastic nature of SN-1 has no effect on antifouling performance and paint will immediately harden when placed into service of cooler waters.

Other:

ePaint SN-1 coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint SN-1 or other ePaint products.

Features

 

  • Self-polishing finish controls release of active materials and prevents old paint build up
  • Unlimited coat to launch time, paint in the fall before winter storage
  • Safe to haul boats in and out of the water
  • Perfect for any boat, outdrives and running gear

Overview

 

  • Coverage rate: 270 ft2/gal; 68 ft2/qt
  • Available colors: White, Gray, Black, Green, Blue, Dark Blue and Red
  • Packaging: Single component; Gallon
  • Thinner: ePaint EP-13 thinner
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP
  •  Finish: Eggshell-like
  •  Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges
  •  Average Service Life: Affected by number of coats, color choice, boating usage, available sunlight and water temperatures; average service life for boats in temperate waters is 18-22 months, boats in tropical waters is 12-18 months with three full coats and additional coats around waterline, leading edges, and high wash areas
  •  Compatibility: Fiberglass, aluminum, steel, outboards, outdrives, trim tabs, epoxy type primers, and most popular traditional bottom paints.
  •  Not recommended for:
    • Trailered boats in hot climates
    • Over very soft ablative paints
    • Bare metal (prime first)
    • Application by non-commercial painters
  • ePaint SN-1 must be applied by a commercial facility or government entity Proper personal protective equipment must be worn when applying ePaint SN-1 (e.g. goggles, gloves, respirator with organic vapor cartridge, Tyvek suit, etc.)

For complete application procedures and requirements see the Tech Data Sheet tab.

Want to buy now? Authorized vendors linked below. Click the logo to visit the product page directly.

 

 

logo

James Town Distributors

 

 

 

 

FisheriesLogo

 

head01

 

SN-1 HP Antifouling Paint
$318.00
SN-1 HP Antifouling Paint Image

Description

  • Copper and tributyltin-free alternative antifouling paint for high performance applications
  • Formerly only available for U.S. Government agencies, SN1 HP now approved for use on commercial vessels and commercial application
  • Offers drag reduction and fuel savings
  • Use in both fresh and salt water
  • Features ePaint’s patented photo-active technology and Sea Nine 211N™ active
  • Compatible over most popular antifouling paints and easy for commercial applicators to apply
  • Will not promote galvanic corrosion on aluminum, steel or metal hulls and parts
  • Used for boats with average operating speeds of greater than 30 knots:
    • Crew boats
    • Patrol boats
    • Utility boats
    • Emergency response, police, and fire boats
    • Transport vessels
    • Fishing boats
    • Military assault craft

Considerations:

  • Due to the photoactive nature of ePaint SN-1 HP, additional coats around the waterline are strongly recommended to extend service life.
  • SN-1 HP is thermo-plastic by nature and hot temperatures above 90 deg. F can soften SN-1 HP slightly, particularly on aluminum boats in full sun, which can cause paint to dig into pads and straps.
  • If SN-1 is to be launched in hot climates, consider launching boat in the morning before full sun and temperatures climb. Place plastic sheeting between pads and straps before lifting. The thermo-plastic nature of SN-1 HP has no effect on antifouling performance and paint will immediately harden when placed into service of cooler waters.

Other:

ePaint SN1 HP coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint SN1 HPor other ePaint products.

Features

  • Self-polishing finish controls release of active materials and prevents old paint build up
  • Unlimited coat to launch time, paint in the fall before winter storage
  • Safe to haul boats in and out of the water
  • Perfect for any boat, outdrives and running gear

 

Overview

  • Coverage rate: 270 ft2/gal; 68 ft2/qt
  • Available colors: White, Gray, Black and Safety Orange
  • Packaging: Single component; Gallon
  • Thinner: ePaint EP-13 thinner
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP) ? Finish: Eggshell-like
  • Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.
  • Average Service Life: Affected by number of coats, color choice, boating usage, available sunlight and water temperatures; average service life for boats in temperate waters is 18-22 months, boats in tropical waters is 12-18 months with three full coats and additional coats around waterline, leading edges, and high wash areas
  • Compatibility: Fiberglass, aluminum, steel, outboards, outdrives, trim tabs, epoxy type primers, and most popular traditional bottom paints.
  • Not recommended for:
    • Trailered boats in hot climates
    • Over very soft ablative paints
    • Bare metal (prime first)
    • Application by non-commercial painters
  • ePaint SN-1 HP must be applied by a commercial facility or government entity
  • Proper personal protective equipment must be worn when applying ePaint SN-1 (e.g. goggles, gloves, respirator with organic vapor cartridge, Tyvek suit, etc.)

For complete application procedures and requirements see the Tech Data Sheet tab.

ZO Antifouling Paint
$285.00
ZO Antifouling Paint Image

Description

  • Excellent general purpose antifouling paint
  • Features Zinc Omadine® and ePaint’s patented photoactive technology to prevent settling and attachment of hard shell-type organisms
  • Extremely effective antifouling protection
  • Recommended for all recreational and commercial vessels; work boats, crew boats, fishing boats, police and fire boats
  • Suitable for fresh and salt water
  • Prevents grass, slime, algae and bacteria
  • Safe for aluminum boats, motor brackets, trim tabs and running gear

ePaint ZO coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint ZO or other ePaint products.

 

Features

  • Available in bright colors and & true white – does not discolor like competitors’ white paints
  • Hybrid finish incorporates benefits of both hard and ablative type paints – no old paint build up
  • Unlimited coat to launch time, paint in the fall before winter storage
  • Okay to haul boats in and out

Overview

  • Coverage rate: 310 ft2/gal; 78-80 ft2/qt
  • Available colors: White, Gray, Black, Green, Blue, Dark Blue, Red, Signal Yellow and Safety Orange
  • Packaging: Quart, Gallon, Five Gallon
  • Thinner: ePaint EP-13 thinner
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP)
  • Finish: Eggshell-like finish
  • Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.
  • Safe for all hull types
  • Dark colors are not recommended for high fouling environments. Chose white or gray for these conditions.

For complete application procedures and requirements see the Tech Data Sheet tab.

ZO HP Antifouling Paint
$325.00
ZO HP Antifouling Paint Image

Description

  • High performance antifouling paint recommended for fresh and salt water
  • Features Zinc Omadine® and ePaint’s patented photoactive technology to prevent settling and attachment of hard shell-type organisms
  • Formulated with fluoro-polymers to provide the lowest friction surface when wet
  • Great choice for the serious sailor
  • Extremely effective antifouling protection
  • Prevents grass, slime, algae and bacteria
  • Offers drag reduction and fuel savings
  • Good for boats that are frequently hauled and launched by trailer

Considerations:

  • Due to the photo-active nature of ZO-HP, additional coats around the waterline strongly recommended to extend service life.
  • ZO-HP is viscous, for easier application at cool or warm temperatures or for spray application, reduce only with ePaint EP-13 thinner
  • For a smooth racing bottom finish, spray application is the recommended method. Alternately, ZO-HP may be rolled and once hard it can be wet sanded and polished to a mirror like finish. Note: it will take several days at warm temperatures due to fluoropolymer technology for paint to harden to a point where it will readily sand and not gum up paper, especially if applied at cool temperatures.

Other:

ePaint ZO-HP coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint ZO-HP or other ePaint products.

 

Features

  • Hybrid finish incorporates benefits of both hard and ablative type paints – no old paint build up
  • Maximum dry to launch time of 60 days
  • Okay to haul boats in and out
  • Compatible over many hard antifoulants and epoxy barrier coats
  • Paint may be maintenance scrubbed in-water without taking paint off

Overview

  • Coverage rate: 275 ft2 /gal; 70 ft2 /qt
  • Available colors: White, Gray, and Safety Orange
  • Packaging: Single component available in Quart, Gallon, and Five Gallon containers
  • Thinner: ePaint EP-13 thinner
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP). For a racing finish, spray application is preferred method or alternatively roll and wet sand smooth when finish is hard
  • Finish: Eggshell-like finish
  • Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.
  •  Safe for all hull types

For complete application procedures and requirements see the Tech Data Sheet tab.

Ecominder Antifouling Paint
$200.00
Ecominder Antifouling Paint Image

Description

  • Copper free
  • Use in both fresh water and low fouling salt waters
  • Formulated with bio-polymers derived from renewable resources
  • Recyclable container
  • Designed to control slime, algae, and bacteria
  • Features Zinc Omadine and ePaint’s patented photoactive technology to control settling and attachment of hard shell organisms
  • Use on fiberglass, aluminum, steel and wood hulls
  • Great for cruising sailboats, powerboats, pontoon boats, and trailered boats
  • Safe for use on engine brackets and running gear

ePaint Ecominder coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint Ecominder or other ePaint products.

 

Features

  • Safe and Easy to Apply
    • Compatible over most popular antifouling paints
    • No VOC’s or harsh solvent smell
    • Apply multiple coats per day at warm temperatures
    • Clean up with soap and water
  • Unlimited dry to launch time; paint in the fall, launch in the spring
  • Advanced ePaint Antifouling Technology
    • Innovative formula replaces harsh solvents with water
    • Features Zinc Omadine® for the most advanced slime control and ePaint’s patented photoactive technology
    • Hybrid self-polishing finish provides the benefits of both hard and soft type antifouling paints
  • Controlled wear so no old paint build up
  • Scrub with minimal loss of paint

 

Overview

  • Coverage rate: 350-400 ft2 /gal; 88-100 ft2 qt
  • Available colors: White, Gray, Black, Green, Blue, Dark blue, Red, Signal Yellow and Safety Orange
  • Packaging: Quart, Gallon, Five Gallon
  • Thinner: Bottled water
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP)
  • Finish: Low Gloss
  • Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.
  • Safe for all hull types
  • Not recommended for high fouling bodies of water

For complete application procedures and requirements see the Tech Data Sheet tab.

EP-2000 Antifouling Paint
$290.00
EP-2000 Antifouling Paint Image

Description

  • EP-2000 is a copper-free, water based antifouling paint.
  • Paint cures to a hard mar-resistant surface which can be wet sanded to a mirror like finish if desired.
  • EP-2000 provides the fastest, cleanest, and whitest bottom you’ll find anywhere.
  • Practical Sailor magazine has consistently given EP-2000 an Excellent rating in Florida waters, claiming that EP-2000 is the only copper-free paint to ever last 24 months in Florida waters.
  • While EP-2000 is not compatible over existing antifouling coatings, it can be re-applied over EP-2000 once the change is made.

ePaint EP-2000 coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint EP-2000 or other ePaint products.

Features

  • Excellent antifouling performance
  • Well-suited for all boat types in salt or fresh water
  • Hard finish making it perfect for racers or trailering
  • Copper and organotin free
  • Hauling and re-launching does not adversely impact performance
  • Long lasting protection
  • Easy clean up with soap and water
  • VOC compliant in all states

 

 

Coverage rate 210 ft2 /gal

Available in White, Gray, Black, Green, Blue, Dark Blue, Red, Signal Yellow and Safety Orange

Packaging: Quart, Gallon, Five Gallon

Thinner: Bottled water

Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP)

Finish: Low Gloss

Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.

Safe for all hull types

For complete application procedures and requirements see the Tech Data Sheet tab.

EP-2000 For Pontoons
$290.00
EP-2000 For Pontoons Image

Description

  • EP-2000 is a copper-free, water based antifouling paint.
  • Self-priming over new/clean aluminum
  • Paint cures to a hard mar-resistant surface which can be wet sanded to a mirror like finish if desired.
  • EP-2000 provides the fastest, cleanest, and whitest bottom you’ll find anywhere.
  • Practical Sailor magazine has consistently given EP-2000 an Excellent rating in Florida waters, claiming that EP-2000 is the only copper-free paint to ever last 24 months in Florida waters.
  • While EP-2000 is not compatible over existing antifouling coatings, it can be re-applied over EP-2000 once the change is made.

ePaint EP-2000 coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint EP-2000 or other ePaint products.

 

Features

 

  • Excellent antifouling performance
  • Well-suited for all boat types in salt or fresh water
  • Hard finish making it perfect for trailering
  • Copper and organotin free
  • Hauling and re-launching does not adversely impact performance
  • Long lasting protection
  • Easy clean up with soap and water
  • VOC compliant in all states

 

  • Coverage rate 210 ft/gal
  • Available in White, Gray, Black, Green, Blue, Dark Blue, Red, Signal Yellow and Safety Orange
  • Packaging: Quart, Gallon, Five Gallon
  • Thinner: Bottled water
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP) ? Finish: Low Gloss
  • Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.
  • Safe for all hull types

For complete application procedures and requirements see the Tech Data Sheet tab.

Primer
EP-Prime 1000 Epoxy Primer
$147.00
EP-Prime 1000 Epoxy Primer Image

Description

  • Two part epoxy primer
  • Robust and easy to use
  • Corrosion protection for metal surfaces
  • Improves adhesion of any ePaint bottom paint to all hull types
  • Minimizes water absorption; is excellent choice for osmotic blister prevention on fiberglass hulls

ePaint EP-Prime 1000 coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint EP-Prime 1000 or other ePaint products.

 

  • Lowers the cost of metal surface preparation; self-priming on metal, no other chemical treatments required
  • High build epoxy and low VOC
  • Easy to apply by roll or spray
  • Surface tolerant
  • Cures at low temperatures
  • Coverage rate:
    • Tie coat – 310 ft/gal at 3.5 mils dry per coat
    • Metal and barrier protection – 240 ft2 /gal ? Available colors: White, Haze Gray and Oxide Red
  • Packaging: Two component gallon kits
  • Thinner: EP-10
  • Application: Traditional methods – roll (1/4” to ½”nap or foam), brush, or airless spray
  • Finish: Semi-gloss
  • Recommended number of coats:
    • Tie coat – one coat
    • Metal – two coats
    • Barrier protection – three coats
  • Safe for aluminum, fiberglass, hull types
  • Not recommended for application over existing antifouling or foul-release coatings, remove first

For complete application procedures and requirements see the Tech Data Sheet tab.

Release Coating
EP-21 Aerosol Release Coating
$30.00
EP-21 Aerosol Release Coating Image
  • Available in Yamaha® like silver blue and Honda® like metallic gray
  • Biocide free, photo-active release coating
  • Releases biofouling by slowly eroding like a bar of soap
  • Single season protection on boats that move; multi-season protection is possible if boat is seldom used
  • Applies just like traditional paints
  • Multiple coats may be applied in the same day
  • Is not considered an antifouling coating; some maintenance scrubbing may be required to keep bottom free of growth

ePaint EP-21 Aerosol coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint EP-21 Aerosol or other ePaint products.

 

  • Practical Sailor magazine rates “Excellent” after 6 months; “Good” after 12 months in Florida waters
  • Soft ablative formula wears over time releasing bio-fouling and preventing paint build up
  • For use on fiberglass, aluminum, wood, outboards, outdrives, and trim tabs
  • Fast drying formula, multiple coats per day possible
  • No maximum dry-to-launch times
  • Safe to haul in and out of the water
  • Compatible with most epoxy-type primers and popular traditional antifouling paints

 

  • Coverage rate: 15 ft/can
  • Available colors: White, Gray, Black, Metallic Silver, Metallic Blue Silver
  • Packaging: 12 oz. spray can
  • Thinner: ePaint EP-13 thinner, clean up
  • Application: Spray
  • Finish: Eggshell-like finish
  • Recommended number of coats: 2 or 3 full coats
  • Compatibility: Fiberglass, aluminum, wood, outboards, outdrives, trim tabs, epoxy type primers, and most popular traditional bottom paints. Safe for aluminum and metal; prime bare metal first with ePaint EP-Prime 1000

For complete application procedures and requirements see the Tech Data Sheet tab.

Considerations:

  • Do not apply EP-21 on unpainted metal surfaces; for bare metal, first coat with EP-Prime 1000 corrosion inhibiting primer.
  • Due to the soft ablativeness of EP-21, applying the recommended number of coats is strongly recommended for maximum service life
  • For easier application at cool or warm temperatures, or for spray application, reduce with E-Paint EP-13 thinner
  • EP-21 does not contain a pesticide and it is not considered an antifouling coating; typically boat movement provides enough force to knock growth away from hull. Depending on boat usage and environment, maintenance scrubbing may be required to keep hull clean but growth is readily removed as long as paint is on the hull
  • Take care when cleaning EP-21 surface via power washing at end of season; too forceful spray technique will remove good paint
  • EP-21 is a very soft ablative and should be removed before re-coating with a different paint system; EP-21 is readily removed by power washing or sanding
EP-21 Release Coating
$168.00
EP-21 Release Coating Image

Description

  • Biocide free, photo-active release coating
  • Releases biofouling by slowly eroding like a bar of soap
  • Single season protection on boats that move; multi-season protection is possible if boat is seldom used
  • Applies just like traditional paints
  • Multiple coats may be applied in the same day
  • Is not considered an antifouling coating; some maintenance scrubbing may be required to keep bottom free of growth

ePaint EP-21 coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint EP-21 or other ePaint products.

Description

  • Practical Sailor magazine rates “Excellent” after 6 months; “Good” after 12 months in Florida waters
  • Soft ablative formula wears over time releasing bio-fouling and preventing paint build up
  • For use on fiberglass, aluminum, wood, outboards, outdrives, and trim tabs
  • Fast drying formula, multiple coats per day possible
  • No maximum dry-to-launch times
  • Safe to haul in and out of the water
  • Compatible with most epoxy-type primers and popular traditional antifouling paints

 

  • Coverage rate: 310 ft/gal; 78-80 ft2 /qt
  • Available colors: White, Gray
  • Packaging: Quart, Gallon, and Five Gallon
  • Thinner: ePaint EP-13 thinner
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP) ? Finish: Eggshell-like finish
  • Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.
  • Compatibility: Fiberglass, aluminum, wood, outboards, outdrives, trim tabs, epoxy type primers, and most popular traditional bottom paints.
  • Safe for aluminum and metal; prime bare metal first with ePaint EP-Prime 1000

For complete application procedures and requirements see the Tech Data Sheet tab.

Considerations:

  • Do not apply EP-21 on unpainted metal surfaces; for bare metal, first coat with EP-Prime 1000 corrosion inhibiting primer.
  • Due to the soft ablativeness of EP-21, applying the recommended number of coats is strongly recommended for maximum service life
  • For easier application at cool or warm temperatures, or for spray application, reduce with E-Paint EP-13 thinner
  • EP-21 does not contain a pesticide and it is not considered an antifouling coating; typically boat movement provides enough force to knock growth away from hull. Depending on boat usage and environment, maintenance scrubbing may be required to keep hull clean but growth is readily removed as long as paint is on the hull
  • Take care when cleaning EP-21 surface via power washing at end of season; too forceful spray technique will remove good paint
  • EP-21 is a very soft ablative and should be removed before re-coating with a different paint system; EP-21 is readily removed by power washing or sanding
Sunwave Photo Active Coating
$168.00
Sunwave Photo Active Coating Image

Description

  • Hard mar-resistant finish
  • Stands up to periodic maintenance scrubbing
  • Ablative resin chemistry to wear away over time preventing paint build up
  • Compatible with most epoxy primers, but not compatible over most traditional antifouling paints
  • Routine maintenance scrubbing or boat motion will likely be needed to keep the hull clean
  • Growth should wipe away without paint loss

ePaint Sunwave® coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint Sunwave® or other ePaint products.

 

  • Economically priced
  • Self-priming on aluminum surfaces
  • Hard, photo-ablative surface
  • No coat-to-launch time
  • Safe to haul in and out of the water
  • Uses:
    • Pontoon boats
    • Dry-stacked boats
    • Dry-sailed boats
    • Trailered boats
  • Coverage: 210 ft2/gal
  • Available colors: White and Gray
  • Packaging: two component system, available in gallons only
  • Mixing ratio: 4.3 Part A to 1.0 Part B
  • Thinner: mineral-free bottled water, generally not required, 10% max by volume
  • Clean up: water
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP)
  • Finish: hard eggshell-like
  • Recommended Number of Coats: 2 full coats with additional coat(s) around waterline and high wash areas for longest service life
  • Safe for: fiberglass, aluminum, steel (primed), wood (primed), epoxy-type primers, and many existing hard-type bottom paints

For application procedures and requirements see the Tech Data Sheet tab.

Thinners
EP-10 Thinner
$72.00
EP-10 Thinner Image

Description

Use to ease application when applying paints at cool and hot temperatures

  • For smoother finish when rolling
  • For spray application

ePaint EP-10 coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint EP-10 or other ePaint products.

Features/Overview

Safe and easy to use

  • Packaging: Gallon, Five Gallon
  • Not for sale, use or distribution in California

For complete application procedures and requirements see the Tech Data Sheet tab.

EP-13 Thinner
$60.00
EP-13 Thinner Image

Description

Use to ease application when applying paints at cool and hot temperatures

  •  For smoother finish when rolling
  • For spray application

ePaint EP-13 coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint EP-10 or other ePaint products.

Features/Overview

Safe and easy to use

  • Packaging: Quart, Gallon
  • Not for sale, use or distribution in California

For complete application procedures and requirements see the Tech Data Sheet tab.

Ecominder Antifouling Paint Image
Ecominder Antifouling Paint
Description Copper free Use in both fresh water and low fouling salt waters Formulated with bio-polymers derived from renewable resources Recyclable container Designed to control slime, al... Read More
$200.00
EP-10 Thinner Image
EP-10 Thinner
Description Use to ease application when applying paints at cool and hot temperatures For smoother finish when rolling For spray application ePaint EP-10 coating technology was developed, uses m... Read More
$72.00
EP-13 Thinner Image
EP-13 Thinner
Description Use to ease application when applying paints at cool and hot temperatures  For smoother finish when rolling For spray application ePaint EP-13 coating technology was developed, uses... Read More
$60.00
EP-2000 Antifouling Paint Image
EP-2000 Antifouling Paint
Description EP-2000 is a copper-free, water based antifouling paint. Paint cures to a hard mar-resistant surface which can be wet sanded to a mirror like finish if desired. EP-2000 provides the fastest, cl... Read More
$290.00
EP-2000 For Pontoons Image
EP-2000 For Pontoons
Description EP-2000 is a copper-free, water based antifouling paint. Self-priming over new/clean aluminum Paint cures to a hard mar-resistant surface which can be wet sanded to a mirror like finish if desir... Read More
$290.00
EP-21 Aerosol Release Coating Image
EP-21 Aerosol Release Coating
Available in Yamaha® like silver blue and Honda® like metallic gray Biocide free, photo-active release coating Releases biofouling by slowly eroding like a bar of soap Single season protection on boats ... Read More
$30.00
EP-21 Release Coating Image
EP-21 Release Coating
Description Biocide free, photo-active release coating Releases biofouling by slowly eroding like a bar of soap Single season protection on boats that move; multi-season protection is possible if boat is se... Read More
$168.00
EP-Prime 1000 Epoxy Primer Image
EP-Prime 1000 Epoxy Primer
Description Two part epoxy primer Robust and easy to use Corrosion protection for metal surfaces Improves adhesion of any ePaint bottom paint to all hull types Minimizes water absorption; ... Read More
$147.00
SN-1 Antifouling Paint Image
SN-1 Antifouling Paint
Description Copper and tributyltin-free alternative antifouling paint for heavy duty applications Formerly only available for U.S. Government agencies, SN-1 now approved for use on commercial vessels and... Read More
$273.00
SN-1 HP Antifouling Paint Image
SN-1 HP Antifouling Paint
Description Copper and tributyltin-free alternative antifouling paint for high performance applications Formerly only available for U.S. Government agencies, SN1 HP now approved for use on commercial vessels ... Read More
$318.00
Sunwave Photo Active Coating Image
Sunwave Photo Active Coating
Description Hard mar-resistant finish Stands up to periodic maintenance scrubbing Ablative resin chemistry to wear away over time preventing paint build up Compatible with most epoxy primers, but n... Read More
$168.00
ZO Antifouling Paint Image
ZO Antifouling Paint
Description Excellent general purpose antifouling paint Features Zinc Omadine® and ePaint’s patented photoactive technology to prevent settling and attachment of hard shell-type organisms Extremely effec... Read More
$285.00
ZO HP Antifouling Paint Image
ZO HP Antifouling Paint
Description High performance antifouling paint recommended for fresh and salt water Features Zinc Omadine® and ePaint’s patented photoactive technology to prevent settling and attachment of hard shell-type organi... Read More
$325.00
Paint
SN-1 Antifouling Paint Image
SN-1 Antifouling Paint
Description Copper and tributyltin-free alternative antifouling paint for heavy duty applications Formerly only available for U.S. Government agencies, SN-1 now approved for use on commercial vessels and... Read More
$273.00
SN-1 HP Antifouling Paint Image
SN-1 HP Antifouling Paint
Description Copper and tributyltin-free alternative antifouling paint for high performance applications Formerly only available for U.S. Government agencies, SN1 HP now approved for use on commercial vessels ... Read More
$318.00
ZO Antifouling Paint Image
ZO Antifouling Paint
Description Excellent general purpose antifouling paint Features Zinc Omadine® and ePaint’s patented photoactive technology to prevent settling and attachment of hard shell-type organisms Extremely effec... Read More
$285.00
ZO HP Antifouling Paint Image
ZO HP Antifouling Paint
Description High performance antifouling paint recommended for fresh and salt water Features Zinc Omadine® and ePaint’s patented photoactive technology to prevent settling and attachment of hard shell-type organi... Read More
$325.00
Ecominder Antifouling Paint Image
Ecominder Antifouling Paint
Description Copper free Use in both fresh water and low fouling salt waters Formulated with bio-polymers derived from renewable resources Recyclable container Designed to control slime, al... Read More
$200.00
EP-2000 Antifouling Paint Image
EP-2000 Antifouling Paint
Description EP-2000 is a copper-free, water based antifouling paint. Paint cures to a hard mar-resistant surface which can be wet sanded to a mirror like finish if desired. EP-2000 provides the fastest, cl... Read More
$290.00
EP-2000 For Pontoons Image
EP-2000 For Pontoons
Description EP-2000 is a copper-free, water based antifouling paint. Self-priming over new/clean aluminum Paint cures to a hard mar-resistant surface which can be wet sanded to a mirror like finish if desir... Read More
$290.00
Primer
EP-Prime 1000 Epoxy Primer Image
EP-Prime 1000 Epoxy Primer
Description Two part epoxy primer Robust and easy to use Corrosion protection for metal surfaces Improves adhesion of any ePaint bottom paint to all hull types Minimizes water absorption; ... Read More
$147.00
Release Coating
EP-21 Aerosol Release Coating Image
EP-21 Aerosol Release Coating
Available in Yamaha® like silver blue and Honda® like metallic gray Biocide free, photo-active release coating Releases biofouling by slowly eroding like a bar of soap Single season protection on boats ... Read More
$30.00
EP-21 Release Coating Image
EP-21 Release Coating
Description Biocide free, photo-active release coating Releases biofouling by slowly eroding like a bar of soap Single season protection on boats that move; multi-season protection is possible if boat is se... Read More
$168.00
Sunwave Photo Active Coating Image
Sunwave Photo Active Coating
Description Hard mar-resistant finish Stands up to periodic maintenance scrubbing Ablative resin chemistry to wear away over time preventing paint build up Compatible with most epoxy primers, but n... Read More
$168.00
Thinners
EP-10 Thinner Image
EP-10 Thinner
Description Use to ease application when applying paints at cool and hot temperatures For smoother finish when rolling For spray application ePaint EP-10 coating technology was developed, uses m... Read More
$72.00
EP-13 Thinner Image
EP-13 Thinner
Description Use to ease application when applying paints at cool and hot temperatures  For smoother finish when rolling For spray application ePaint EP-13 coating technology was developed, uses... Read More
$60.00